Click image to view full size image
The Isuzu KV800 rear loader garbage truck is a vehicle specially designed for garbage collection and compression. Isuzu KV800 refuse compactor truck also called Isuzu KV800 trash compactor truck, , Isuzu KV800 back loader garbage truck, Isuzu KV800 compactor lorry, etc. Which is combines the ruggedness and durability of the Japanese technology Isuzu KV800 chassis with the specialized functions of a compactor garbage truck. However, it's important to note that exact construction details may vary by manufacturer and region, all in all, Isuzu 4JZ1-TCG60 KV800 Refuse Compactors is an idea truck for you.
• The compression ratio of can reach more than 1:2.5. After the domestic garbage is compressed, the density can reach 0.5-0.8t/m3, and the loading capacity is larger. And the one cycle time of filling operation is less than 30 seconds, and the one cycle time of unloading operation is less than 40 seconds, which greatly improves the operation efficiency.
• The installation of Isuzu rear loader garbage truck has two operating modes, electronic control and manual, which can independently complete the garbage loading and unloading operation, which is convenient for inspection and maintenance. Operation buttons are set in the cab and at the rear of the vehicle respectively. When unloading garbage in the garbage yard, the operator does not need to get off the Isuzu back loader garbage truck, and the whole process of unloading garbage can be completed in the cab, which is more convenient and faster.
• The junction of the hopper and the refuse body is locked by a special-shaped sealing strip through hydraulic locking, so that the garbage can be reliably sealed in the refuse body and prevent the leakage of garbage and sewage. A sewage tank is separately designed outside the garbage box, which can collect the sewage generated during the garbage compression process and discharge it in a centralized manner, effectively avoiding secondary pollution.
• In order to effectively ensure the safety of operators and equipment, an emergency brake button is specially set up on the Isuzu waste management rear loader, which can make the garbage hopper stop in any state or at any position; and in the hydraulic oil circuit of the lifting filler, Equipped with a safety device to prevent the oil pipe from bursting and the filler from falling suddenly to improve the safety of use.
• The components of the key parts of the Isuzu trash crusher trucks are made of high-quality imported components to ensure the stable and reliable operation of the compressed garbage truck.
Isuzu KV800 mobile refuse compactor truck export to European country
| GENERAL | |
| Make/Model | ISUZU |
| Drive Type | 4×2 Left Hand Drive |
| Overall Dimension (L x W x H) | 7,180×2,400×2,600(mm) |
| Gross Vehicle Weight | 8,400kg |
| Curb Weight | 4,600kg |
| Wheelbase | 3360 mm or 3815 mm |
| Chassis Designed | ISUZU KV800 series |
| Cabin |
Hydraulic power steering type.
1 driver+2 passengers |
| Drive wheel(Tires ) | 4+2 and one spare (total 7 wheels) |
| Tire Size | 7.00R16 |
| ENGINE | |
| Make / Model | ISUZU / 4JZ1-TC |
| Type | 4 cylinders in line, 4 strokes direct injection, water cooling, Intercooler Turbocharged |
| Displacement | 2.999L |
| Nominal Power | 150HP (111kW) @ 2,800rpm |
| Peak Torque | 375N.m@1,300-2,800rpm |
| Emission Standard | Euro 6 |
| TRANSMISSION | Â |
| Make / Model | ISUZU/MYY |
| Type | Diesel |
| Operation | Manual |
| Number of Speeds | 6F+1R |
| CONSTRUCTION | ISUZU chassis; Body; Tailgate (rear hopper); Ejection/discharging Plate; Compaction Plate; Slide Plate |
| CAPACITY | 8m3 |
| BODY STEEL | |
| Garbage Container | High corrosion resistance Q345 carbon steel or T420 material steel 5mm thickness of body floor, 4mm thickness of side and roof. (equivalent as IS-2062 Grade A or ASTM a36) |
| Hopper Floor | NM450 (similar to HARDOX) wear-resistant, high-tensile steel sheet. |
| Tailgate Sheet | High tensile steel sheet 4 mm thickness |
| Compaction Plate | High tensile steel sheet 5 mm thickness |
| TAILGATE (REAR HOPPER) | The components include the tailgate floor, an extension of the rear hopper floor inside the body, and the side wall. The tailgate is attached to the body through top hinges and can be lifted upwards using two double-acting hydraulic cylinders. |
| COMPACTION RATIO | The volumetric compaction ratio varies between 3:1 to 6:1, depending on the characteristics and density of the garbage present in the area. It should be noted that the mentioned ratio is applicable to household garbage. |
| HOPPER CAPACITY | The garbage capacity of the loading hopper is around 2m3 |
| SEALING | With a special design leak-proof rubber sea between the tailgate and the body |
| LOCKING | Hydraulic locking by means of reverse action of two hydraulic tailgate-lifting cylinders. |
| SAFETY PROPS | To ensure safety during maintenance, manual safety props are placed between the body and tailgate of the equipment. |
| SAFETY VALVE | The tailgate is equipped with a safety valve to prevent dropping and the hydraulic lines are in place to avoid sudden falls. |
| CONTROL | The PLC control box manages the system and offers options such as start, stop, 1-cycle, continuous cycles, and rescue activities. The tailgate and ejector controls are located at the front of the body. The loading controls are positioned on the right side of the tailgate and are manually operated for safety reasons. Compaction is controlled using electric push buttons, but there is also a manual control option available. |
| DISCHARGE OF GARBAGE |
The unloading cycle will last a minimum of 4 minutes and 30 seconds.
Ejection Plate: The movement of discharging plate (panel) will be step by step in the progressive method (in stages). |
| HYDRAULIC COMPONENTS |
FRONT DIRECTION CONTROL VALVE (Front Distributor)
MAIN SAFETY VALVE. All arc hydraulic and double-acting. The dimensions of the cylinders' arc are designed to accomplish the stipulated cycle times and compaction ratio. Hydraulic cylinder pipes & bores included. All high-pressure hydraulic oil hoses have an app. burst rating 4 times more than the specific system working pressure. |
Â
Â
Â
Isuzu KV800 loadmaster rear loader working
Make the 240L or 1100L garbage bin near the rear tilting device
Isuzu KV800 refuse compactor lifter working mode
Operating the control box to make the tilting device lifting up
Isuzu KV800 compactor truck bin lifter
When tilting device lifting up, all rubbish get into the hopper, and then operating slide plate & scraper working to make rubbish into compactor body
Â
The ISUZU 8 CBM Rear Loader Compactor Garbage Truck is called Isuzu 4JZ1-TCG60 KV800 Refuse Compactors meticulously crafted for industrial waste management, excelling in the collection, compaction, and transportation of solid waste from residential and industrial areas. Featuring an 8m3 garbage body mounted on the robust ISUZU KV800 chassis truck, it offers versatility in various working environments. The winch-lifted containers enhance operational efficiency, while the high license plate light, designed with an American touch, facilitates convenient nighttime operations.
Leveraging over two decades of expertise, ISUZU Vehicles has successfully globalized its proficiency in manufacturing superstructure equipment for waste management. Our dedicated and skilled garbage truck production team strives to bring forth practical products of the highest quality, intending to make a positive impact on municipal and private waste industry companies worldwide.
More detailed pictures for the Isuzu KV800 waste compactor rear loader truck as below:
Additional information for
| Certification |
CCC, CE, ISO14001:2015, ISO45001∶2018, ISO9000, ISO9001:2015, RoHS |
|---|---|
| Color |
Customized Color |
| Condition |
New, Stock |
| Customized |
Yes |
| Delivery Time |
20 Days, 30 Days, 50 Days, 60 Days |
| Drive Mode |
4×2 |
| Emission Standard |
Euro V, Euro VI |
| Packaging Details |
Waxed |
| Power Type |
Diesel |
| Warranty Period |
12 Months, 24 Months, 25 Months, 48 Months |
| Terms of Payment |
LC, T/T, Western Union |
Â
https://www.isuzuv.com/
E-mail: 